 |
| Quantity: | |
|---|---|
XTL-Vacuum Autoloader
Features：
·The main engine and the material hopper are designed separately,and thus it is safe,easy and convenient to be opperated.
·The whole operation is controlled by MicroTrip computer.
·Equipped with an independent filter,which is very convenient to clean up dust.
·The equipped muffler reduces the noise in operation.
·Stainless steel material hopper is light in weight,durable and very convenient for cleaning the device.
·The control box,being designed separately,is easy to be well maintained.
·Auto-buzzer will give alarm while lacking material.
·Auto-protective device protects motor against overloading.
The bunker with electronic eye can be installed on the charging inlet of molding machine directly.
The air revolving dust arrester reduce the clean times of filter is suitable for the grinded material conveying.
Can select two-material proportional valve ,used for new material mixed grinded material using or instant receiving of grinded material.
Main Technical Data
Model | XTL-600GN | ||
Motor | Type | Induction | |
Specification | 1.5kw 3Ø | ||
Conveying Capacity （kg/hr） | 450 | ||
Static wind pressure (MAX) | 1450mmAq | ||
Filter | Ø185×110H | ||
Volume of Material Hopper （L） | 6.5 | ||
Inside Diameter of Conveying Pipe（mm） | Ø38 | ||
External size（mm） | Main Body L W H | 680×370×500 | |
Material Hopper L W H | 430×440×295 | ||
Weight （KG） | Main Body | 55 | |
Material Hopper | 6 | ||
Model | XTL-300GE | ||
Motor | Type | Carbon Brush | |
Specification | 1.1kw 1Ø | ||
（kg/hr） Conveying Capacity | 350 | ||
Static wind pressure(MAX) | 1500mmAq | ||
Filter | Ø185×90H | ||
（L） Volume of Material Hopper | 6 | ||
（mm） Inside Diameter of Conveying Pipe | Ø38 | ||
（mm） External size | Main Body L W H | 500×400×600 | |
） Weight | Main Body
| 17 | |
Model | XTL-450GE | ||
Motor | Type | Induction | |
Specification | 0.75kw 3Ø | ||
Conveying Capacity （kg/hr） | 400 | ||
Static wind pressure (MAX) | 1500mmAq | ||
Filter | Ø185×90H | ||
Volume of Material Hopper （L） | 6 | ||
Inside Diameter of Conveying Pipe（mm） | Ø38 | ||
External size（mm） | Main Body L W H | 500×400×800 | |
Weight （KG） | Main Body | 31 | |
Model | XTL-300GN | ||||||
Motor | Type | Carbon Brush | |||||
Specification | 1.1kw 3Ø | ||||||
Conveying Capacity （kg/hr） | 400 | ||||||
Static wind pressure (MAX) | 1500mmAq | ||||||
Filter | Ø185×110H | ||||||
Volume of Material Hopper （L） | 6 | ||||||
Inside Diameter of Conveying Pipe（mm） | Ø38 | ||||||
External size（mm） | Main Body L W H | 480×310×430 | |||||
Material Hopper L W H | 430×440×295 | ||||||
Weight （KG） | Main Body | 31 | |||||
Material Hopper | 6 | ||||||
Model | XTL-800GN | ||||||
Motor | Type | Induction | |||||
Specification | 2.2kw 3Ø | ||||||
Conveying Capacity （kg/hr） | 550 | ||||||
Static wind pressure (MAX) | 2000mmAq | ||||||
Filter | Ø185×110H | ||||||
Volume of Material Hopper （L） | 6.5 | ||||||
Inside Diameter of Conveying Pipe（mm） | Ø38 | ||||||
External size（mm） | Main Body L W H | 700×370×500 | |||||
Material Hopper L W H | 430×440×295 | ||||||
Weight （KG） | Main Body | 65 | |||||
Material Hopper | 6 | ||||||
Model | XTL-3.5HP | ||||||
Motor | Type | Induction | |||||
Specification | 3kw 3Ø | ||||||
Conveying Capacity （kg/hr） | 600 | ||||||
Static wind pressure (MAX) | 2200mmAq | ||||||
Filter | Ø185×260H | ||||||
Volume of Material Hopper （L） | 18 | ||||||
Inside Diameter of Conveying Pipe（mm） | Ø50 | ||||||
External size（mm） | Main Body L W H | 700×500×850 | |||||
Material Hopper L W H | 430×440×500 | ||||||
Weight （KG） | Main Body | 72 | |||||
Material Hopper | 7 | ||||||
Model | XTL-5HP | ||||||
Motor | Type | Induction | |||||
Specification | 3.5kw 3Ø | ||||||
Conveying Capacity （kg/hr） | 700 | ||||||
Static wind pressure (MAX) | 2200mmAq | ||||||
Filter | Ø185×260H | ||||||
Volume of Material Hopper （L） | 18 | ||||||
Inside Diameter of Conveying Pipe（mm） | Ø50 | ||||||
External size（mm） | Main Body L W H | 700×500×850 | |||||
Material Hopper L W H | 430×440×500 | ||||||
Weight （KG） | Main Body | 82 | |||||
Material Hopper | 8 | ||||||
Model | XTL-7.5HP | ||||||
Motor | Type | Induction | |||||
Specification | 5.5kw 3Ø | ||||||
Conveying Capacity （kg/hr） | 1100 | ||||||
Static wind pressure (MAX) | 2500mmAq | ||||||
Filter | Ø185×260H | ||||||
Volume of Material Hopper （L） | 18 | ||||||
Inside Diameter of Conveying Pipe（mm） | Ø50 | ||||||
External size（mm） | Main Body L W H | 700×600×850 | |||||
Material Hopper L W H | 430×440×500 | ||||||
Weight （KG） | Main Body | 120 | |||||
Material Hopper | 8 | ||||||
Model | XTL-10HP | ||||||
Motor | Type | Induction | |||||
Specification | 7.5kw 3Ø | ||||||
Conveying Capacity （kg/hr） | 1500 | ||||||
Static wind pressure (MAX) | 2800mmAq | ||||||
Filter | Ø185×260H | ||||||
Volume of Material Hopper （L） | 18 | ||||||
Inside Diameter of Conveying Pipe（mm） | Ø50 | ||||||
External size（mm） | Main Body L W H | 700×650×850 | |||||
Material Hopper L W H | 430×440×500 | ||||||
Weight （KG） | Main Body | 130 | |||||
Material Hopper | 8 | ||||||
Model | XTL-900GN-2 | ||||||
Motor | Type | Induction | |||||
Specification | 2.2kw 3Ø | ||||||
Conveying Capacity（kg/hr） | 450+450 | ||||||
Static wind pressure(MAX) | 2000mmAq | ||||||
Filter | Ø185×110H | ||||||
Volume of Material Hopper（L） | 6.5 +12 | ||||||
Inside Diameter of Conveying Pipe（mm） | Ø38 | ||||||
External size（mm） | Main Body L W H | 850×480×740 | |||||
Material Hopper L W H | 430×440×500 | ||||||
Weight （KG） | Main Body | 70 | |||||
Material Hopper | 6+6 | ||||||
Model | XTL-800GN2-P | ||
Motor | Type | Induction | |
Specification | 1.1kw 3Ø | ||
Conveying Capacity （kg/hr） | 650 | ||
Static wind pressure (MAX) | 1450mmAq | ||
Filter | Ø185×110H | ||
Volume of Material Hopper （L） | 18 | ||
Inside Diameter of Conveying Pipe（mm） | Ø38 | ||
External size（mm） | Main Body L W H | 680×370×500 | |
Material Hopper L W H | 430×440×700 | ||
Weight （KG） | Main Body | 60 | |
Material Hopper | 12 | ||
XTL-Vacuum Autoloader
Features：
·The main engine and the material hopper are designed separately,and thus it is safe,easy and convenient to be opperated.
·The whole operation is controlled by MicroTrip computer.
·Equipped with an independent filter,which is very convenient to clean up dust.
·The equipped muffler reduces the noise in operation.
·Stainless steel material hopper is light in weight,durable and very convenient for cleaning the device.
·The control box,being designed separately,is easy to be well maintained.
·Auto-buzzer will give alarm while lacking material.
·Auto-protective device protects motor against overloading.
The bunker with electronic eye can be installed on the charging inlet of molding machine directly.
The air revolving dust arrester reduce the clean times of filter is suitable for the grinded material conveying.
Can select two-material proportional valve ,used for new material mixed grinded material using or instant receiving of grinded material.
Main Technical Data
Model | XTL-600GN | ||
Motor | Type | Induction | |
Specification | 1.5kw 3Ø | ||
Conveying Capacity （kg/hr） | 450 | ||
Static wind pressure (MAX) | 1450mmAq | ||
Filter | Ø185×110H | ||
Volume of Material Hopper （L） | 6.5 | ||
Inside Diameter of Conveying Pipe（mm） | Ø38 | ||
External size（mm） | Main Body L W H | 680×370×500 | |
Material Hopper L W H | 430×440×295 | ||
Weight （KG） | Main Body | 55 | |
Material Hopper | 6 | ||
Model | XTL-300GE | ||
Motor | Type | Carbon Brush | |
Specification | 1.1kw 1Ø | ||
（kg/hr） Conveying Capacity | 350 | ||
Static wind pressure(MAX) | 1500mmAq | ||
Filter | Ø185×90H | ||
（L） Volume of Material Hopper | 6 | ||
（mm） Inside Diameter of Conveying Pipe | Ø38 | ||
（mm） External size | Main Body L W H | 500×400×600 | |
） Weight | Main Body
| 17 | |
Model | XTL-450GE | ||
Motor | Type | Induction | |
Specification | 0.75kw 3Ø | ||
Conveying Capacity （kg/hr） | 400 | ||
Static wind pressure (MAX) | 1500mmAq | ||
Filter | Ø185×90H | ||
Volume of Material Hopper （L） | 6 | ||
Inside Diameter of Conveying Pipe（mm） | Ø38 | ||
External size（mm） | Main Body L W H | 500×400×800 | |
Weight （KG） | Main Body | 31 | |
Model | XTL-300GN | ||||||
Motor | Type | Carbon Brush | |||||
Specification | 1.1kw 3Ø | ||||||
Conveying Capacity （kg/hr） | 400 | ||||||
Static wind pressure (MAX) | 1500mmAq | ||||||
Filter | Ø185×110H | ||||||
Volume of Material Hopper （L） | 6 | ||||||
Inside Diameter of Conveying Pipe（mm） | Ø38 | ||||||
External size（mm） | Main Body L W H | 480×310×430 | |||||
Material Hopper L W H | 430×440×295 | ||||||
Weight （KG） | Main Body | 31 | |||||
Material Hopper | 6 | ||||||
Model | XTL-800GN | ||||||
Motor | Type | Induction | |||||
Specification | 2.2kw 3Ø | ||||||
Conveying Capacity （kg/hr） | 550 | ||||||
Static wind pressure (MAX) | 2000mmAq | ||||||
Filter | Ø185×110H | ||||||
Volume of Material Hopper （L） | 6.5 | ||||||
Inside Diameter of Conveying Pipe（mm） | Ø38 | ||||||
External size（mm） | Main Body L W H | 700×370×500 | |||||
Material Hopper L W H | 430×440×295 | ||||||
Weight （KG） | Main Body | 65 | |||||
Material Hopper | 6 | ||||||
Model | XTL-3.5HP | ||||||
Motor | Type | Induction | |||||
Specification | 3kw 3Ø | ||||||
Conveying Capacity （kg/hr） | 600 | ||||||
Static wind pressure (MAX) | 2200mmAq | ||||||
Filter | Ø185×260H | ||||||
Volume of Material Hopper （L） | 18 | ||||||
Inside Diameter of Conveying Pipe（mm） | Ø50 | ||||||
External size（mm） | Main Body L W H | 700×500×850 | |||||
Material Hopper L W H | 430×440×500 | ||||||
Weight （KG） | Main Body | 72 | |||||
Material Hopper | 7 | ||||||
Model | XTL-5HP | ||||||
Motor | Type | Induction | |||||
Specification | 3.5kw 3Ø | ||||||
Conveying Capacity （kg/hr） | 700 | ||||||
Static wind pressure (MAX) | 2200mmAq | ||||||
Filter | Ø185×260H | ||||||
Volume of Material Hopper （L） | 18 | ||||||
Inside Diameter of Conveying Pipe（mm） | Ø50 | ||||||
External size（mm） | Main Body L W H | 700×500×850 | |||||
Material Hopper L W H | 430×440×500 | ||||||
Weight （KG） | Main Body | 82 | |||||
Material Hopper | 8 | ||||||
Model | XTL-7.5HP | ||||||
Motor | Type | Induction | |||||
Specification | 5.5kw 3Ø | ||||||
Conveying Capacity （kg/hr） | 1100 | ||||||
Static wind pressure (MAX) | 2500mmAq | ||||||
Filter | Ø185×260H | ||||||
Volume of Material Hopper （L） | 18 | ||||||
Inside Diameter of Conveying Pipe（mm） | Ø50 | ||||||
External size（mm） | Main Body L W H | 700×600×850 | |||||
Material Hopper L W H | 430×440×500 | ||||||
Weight （KG） | Main Body | 120 | |||||
Material Hopper | 8 | ||||||
Model | XTL-10HP | ||||||
Motor | Type | Induction | |||||
Specification | 7.5kw 3Ø | ||||||
Conveying Capacity （kg/hr） | 1500 | ||||||
Static wind pressure (MAX) | 2800mmAq | ||||||
Filter | Ø185×260H | ||||||
Volume of Material Hopper （L） | 18 | ||||||
Inside Diameter of Conveying Pipe（mm） | Ø50 | ||||||
External size（mm） | Main Body L W H | 700×650×850 | |||||
Material Hopper L W H | 430×440×500 | ||||||
Weight （KG） | Main Body | 130 | |||||
Material Hopper | 8 | ||||||
Model | XTL-900GN-2 | ||||||
Motor | Type | Induction | |||||
Specification | 2.2kw 3Ø | ||||||
Conveying Capacity（kg/hr） | 450+450 | ||||||
Static wind pressure(MAX) | 2000mmAq | ||||||
Filter | Ø185×110H | ||||||
Volume of Material Hopper（L） | 6.5 +12 | ||||||
Inside Diameter of Conveying Pipe（mm） | Ø38 | ||||||
External size（mm） | Main Body L W H | 850×480×740 | |||||
Material Hopper L W H | 430×440×500 | ||||||
Weight （KG） | Main Body | 70 | |||||
Material Hopper | 6+6 | ||||||
Model | XTL-800GN2-P | ||
Motor | Type | Induction | |
Specification | 1.1kw 3Ø | ||
Conveying Capacity （kg/hr） | 650 | ||
Static wind pressure (MAX) | 1450mmAq | ||
Filter | Ø185×110H | ||
Volume of Material Hopper （L） | 18 | ||
Inside Diameter of Conveying Pipe（mm） | Ø38 | ||
External size（mm） | Main Body L W H | 680×370×500 | |
Material Hopper L W H | 430×440×700 | ||
Weight （KG） | Main Body | 60 | |
Material Hopper | 12 | ||
